How to clean jewelry: Top 8 funds from darkening and black at home

Removal of gilding from silver

Sometimes the gilded spraying is applied to silver products. After a certain period, the socks may occur to change the appearance of the decoration and make it completely silver. Such need may also arise due to damage to gilding. There are several recommendations for converting jewelry:

  • The first method is based on the impact of a strong oxidizing agent - "royal vodka", which has a very sharp smell. This composition is obtained by mixing the nitric and hydrochloric acids of high concentration. The proportions of the mixture - 1: 3.
  • Another way is the use of an electrolytic bath.

The upper layer of decoration is a varnish coating that is removed by sulfuric acid, acetone, or alcohol.

Despite the effectiveness of both types of procedures, they are not recommended to do at home without special skills to handle chemical compositions. There is a high risk of harm to health and property.

The easiest way to clean jewelry with your own hands

There are special pastes intended for processing such products as well as liquids with which any metal, including gold and silver. But in addition, there are other remedies.

If there is no spraying on a metal decoration, it is not made in the style of the gilded, etc., then it can be cleaned with food soda. To do this, it is poured into her a little water to get paste. Then they apply a cleaner on the product, leave for a while and wash off. In the process of flushing, small particles of soda purify the surface.

Metal decor elements can be treated with dry toothpaste or chalk in the same way as you brush your teeth, then rinse with water and wipe with a soft cloth

Just notice whether the stones are not inserted into the metal, because some of them need to be cleaned by a special way.

Sometimes surgical steel apply for the manufacture of jewelry. It does not rust and does not cause allergic reactions, but if you pour it with vinegar, then the surface can turn.

How to clean the jewelry to make it glitter as new: tips and tricks

Sometimes we are very used to some decorations, we value them and want to extend their life longer. This is really achieving, you just need to follow several rules:

  • do not leave in the bathroom, shoot before visiting a soul or sauna;
  • prevent contact with spirits, lacquer removal fluid and other caustic substances;
  • Do not take dirty hands and shoot before applying makeup or cream.

Keep your jewelry in a not too cold place protected from the sun and dust, since the bright light adversely affects its structure. Do not allow high humidity, but if necessary, clean the cleaning, and then it can serve not one dozen years.

The material is updated 02.08.2017

Simple jewelry and decorations made of precious metal need proper care. From long use, any stones lose an attractive look. Fortunately, you can clean the jewelry so that it is glitter as new. For this, there are proven and effective ways.

Damage decoration is the result of the negative impact of moisture and high temperature. If jewelry is wrong to store, it is oxidized, the stones are darker and losing the brilliance, paint or pollination cracks. In order for cleaning to do not harm your favorite products, it is first necessary to determine the material of the manufacture. Some do not like water, others are well transferring short-term water treatments. As a material for making jewelry uses:

  • copper;
  • plastic;
  • stainless metal treated with a special coating;
  • Semi-precious and artificial stones.

Today, there is a huge selection of metal care products, but the most efficient and safe can be cooked at home:

  1. Return the previous type of darkened jewelry will help a solution of chalk and dental powder. For its preparation, it is necessary in 100 ml of water to dilute 2 spoons of grated chalk. After 2-3 minutes, remove jewelry and clean the soft brush. Remains wash off with water and graze a woolen cloth.
  2. Toothpaste applied to the decoration, perfectly copes with darkened places.
  3. Silver at home is cleaned with the help of casis from food soda and water. The composition is applied to the surface, dries over a few minutes, and then cleaned with a toothbrush. At the end, the decoration is necessary to rinse and wipe dry.

Silver helps to cope with darkened silver. A wetted wipe should be wiped with a product and further polish with a dry cloth to shine.

Periodically, the container must be shaken, for better dirt outrage. After the time has expired, the decoration must be solid under running water. For this type of product, only sparing cleaning is applied.

In no case can not use substances with abrasive elements, as it is possible to erase a spraying.

The products made of yellow metal are placed in a warm solution from the soap, wipe well with a napkin and wipe.

You can try to clean the decorations with a soft cloth, moistened with wine vinegar. Then slip, give to dry.

A spoon of ammonia, added to the mixture, will return the radiance of glass products, and the contaminated artificial pearls perfectly perfectly cleans in the soap solution.

Vinegar with shallow salt cleans the darkened copper decorations. Another unusual, but effective recipe: garlic to grasp, and then mix with a pinch of salt. Apply for 5 minutes, wash off with water, dry dry cloth.

If there is no confidence in the naturalness of the stones, it is better not to water them. Instead, you can take a soft tissue and clean the product with polishing movements.

Storage of jewelry

In order for the product for a long time he pleased its owner, it is necessary to care for the decoration. Several important recommendations for the correct storage of jewelry:

  1. Before the shower, you need to remove all jewelry. And also should not leave it in the bathroom, because the elevated level of humidity affects the state of the products.
  2. The contact of jewelry with perfumes is not allowed.
  3. Removing jewelry must be reduced before applying fat creams and makeup.
  4. For a permanent storage location, you should choose a corner protected from the sun and dust.
  5. Before removing the decoration for a long time, it is recommended to clean the product.

Compliance with simple rules and regular care will help preserve the beauty of beloved jewelry for a long time.

What to clean silver with black

Products made of black silver are distinguished by an abundance of decorative elements: recesses, grooves, ornaments.

Such objects need regular care to remove dust, dirt, climb.

In order to properly wash the black silver at home:

  1. In the deep cup, pour 1 cup with warm water, add 2 tbsp. l. liquid soap.
  2. Pull with a pinch of salt.
  3. Mix thoroughly to completely dissolve the ingredients.
  4. Immerse silver into the solution, leave for 30 minutes.
  5. Gently clean the metal with a soft napkin.

If necessary, refresh dishes, candlesticks, rings or any other products with a smooth surface. Use a quick method of cleansing using a school elast. Curly process metal to shine, trying not to touch the black sections. Then, ride with warm water, swipe dry with a soft napkin.

Old family of black silver jewels are more resistant to cleaning and polishing than new decorations. Modern production technology implies the chemical method of a thin film that creates the effect of darkening of individual sections. With active exposure, the coating is quickly engaged, white spots appear.

Silver cleaning with stones

Before cleaning silver with stones, you need to determine which stone is installed in the ring or pendant:

  • Dense minerals such as sapphire, emerald and aquamarine are not limited to choosing a cleaning agent, but it is recommended to use ammonia alcohol.
  • If the moonstone, turquoise, malachite or opal is standing in the decoration, then brushes, soda and other abrasive pastes do not apply for cleaning. These stones are not very dense, so scratches will appear on friction using abrasives. It is best to use soap water to cleanse.
  • To pomegranate, topaz or ruby ​​change its color, the decorations are wedged only in cold water or a solution without heating. For things with such stones, the ammonia or soap solution is suitable. Minerals themselves are wiping with a cotton swath in alcohol.
  • Pearl, amber and pearls need careful attitude. They do not tolerate the effects of alcohol, alkaline and acid solutions, as well as chlorinated water from the tap. That is why the cleansing use a rag moistened in filtered boiled water. If the stone is not glued, then a little soap can add to the water.
  • Potato starch can be used to purify jewelry with pearls.

How and what can be washed?

So that the sink looked for a long time and tidy, it should be washed daily. Steel has constant contact with water, fats and other kitchen pollution. This impact contributes to the darkening of the material and the occurrence of white plaque on the surface of the sink. Daily cleaning is carried out using cleaning products that can be replaced by the usual detergent for dishes and a soft sponge. Processing the device for washing of economic utensils and other items need after each use procedure. To do this, it should be applied to the surface of the sink detergent and thoroughly wipe with a washcloth. Then wash the walls with clean water and wipe dry.

From dark spots

Such divorces appear due to metal oxidation. If it was not possible to wash the sink from a stainless steel in the usual way, cleaning can be carried out in this way:

  1. Mix in equal proportions 6% vinegar, kitchen salt, starch and dry bleach.
  2. Apply a little substance on the sponge and the resulting stains.
  3. Carefully process the darkening and washed off with running water.

In order for the dark spot, it is not overcess to the dark stall after such a procedure, the clean vinegar should be on the surface of the sink, wait 20-30 minutes. And only then apply funds. Light darkens will withdraw the food soda, which processes problem areas. Wait 20 min. And wash off warm water.

How to get rid of strong pollution?

In the presence of a large amount of dirt and fat, it is urgently to clean the sink from a stainless steel and overha. The procedure follows the old toothbrush, gel for dishes, soda, salt and citric acid. Application:

  1. It is possible to close the sink and pour it in full hot water.
  2. Pour all the ingredients into it and leave to complete cooling.
  3. Do not merge water, wash the sink and its corrugated edges from the plaque with a toothbrush.
  4. After full cleaning water to merge, wipe dry.

To cleaned the device, each component can be used individually. Salt copes well with fatty pollution. Food soda is effective from any plaque and unpleasant specific smell. Vinegar or a solution from citric acid is used as a polishing agent that will not leave on the sink of soap divorces and other defects. In the fight against the residues of the solar fat, the tool will help to cope with vinegar and salt, which must be applied to pollution, and then wait 30 minutes. And wash off with water.

What to remove the smell?

If there are unpleasant aromas in the kitchen, exhibited by a sewer pipe, use you can take advantage of shopping facilities, such as Krot, Mr. Muskul for pipes or other self-selling. If there were no such drugs in the house, you can apply a folk remedy that is no less effective. To do this, it is necessary to flood 150 g of food soda in the sewage hole and pour it with a glass of 6% vinegar. The reaction will follow at the time of hissing and abundant allocation of the resulting foam. Such a means will clean food blockages and absorbs an unpleasant smell.

Recommendations for care

So that the jewelry was beautiful and used for long years, it must be kept correctly and to care for it

Having understood what to clean jewelry, it is important to comply with several care recommendations.

  1. Store in the dry inaccessible from moisture place.
  2. During cosmetic procedures, jewelry is better removed.
  3. Avoid moving on decorations of cosmetics: perfumes, sprays for hair, deodorants. The chemical composition of the means can give a reaction, which is why the product can darken.

Jewelry - easy vulnerable decorations. For a long service, uncomplicated storage and care rules should be followed:

  • Accessories are afraid of water, household chemicals. Before economic work, you need to shoot them.
  • It is recommended to remove and remove objects in the box before visiting the sauna, shower, bathaking.
  • It should be put in the last place: do not allow contact with spirits, hair varnishes, deodorants, creams.
  • For storage requires a separate box or tissue bag. Each subject is allocated its own place so that there are no contact with others. The moisture in the repository should be minimal. It is impossible to leave things in the bathroom.
  • It is recommended to thoroughly dry the products after processing, if necessary, polish.

It is important to remember: keep it easier than repairing or buying anew. The line of industrial means for jewelry or accessible recipes allow at home to contain accessories properly

Important recommendations

Cleaning silver decorations with gilding Start with degreasing. To do this, wipe the surface ethyl, medical, denatured alcohol or water with vinegar (2 tablespoons on a glass of water). This will remove fat raids, dust and other surface pollution.

If the gold-plated chain or bracelet is equipped with a clasp of the non-precious metal, an rust may appear on it in contact with water. Therefore, a piece of decoration with a buckle Try not to immerse yourself in an aqueous solution for a long time, and after cleaning dryly wipe.

The final phase of silver cleaning with gilding is polished. Walk out the suede or a piece of flannel over the surface so that it is a slap.

When all the procedures are completed, let me decorate or dining instruments "relax" for several days. During this time, a protective layer is formed on the surface, and the dirt will adhere less to it.

What can not be cleaned

Since the layer of gilding on a silver product is thin and gentle, refuse to use the following cleaning products:

  • aggressive acids;
  • Hard brushes, sponges, fabrics;
  • Dry powders (chalk, dental powder).

How to save gold spraying

Clean the gold-plated silver is half an eye! So that it rejoiced you for a long time with its original glitter, comply with some simple rules:

  1. The sweat falling on a silver product can lead to oxidation, that is, the appearance of dark raids. Therefore, be sure to decorate decorations in sports and other physical exertion.
  2. Take care of the decorations from creams, perfume, cosmetics, household chemicals. All of them lead to the damage to the upper layer and the appearance of spots.
  3. Remove the decorations with gilding before visiting the pool, baths, bathing in the sea, taking a shower and other water treatments in order to avoid the appearance of rust.
  4. Keep gold-plated silver in special jewelry boxes away from heating devices, sun rays and dampness.
  5. Do not store silver in cardboard boxes. Some types of cardboard are isolated sulfur that promotes metal oxidation.
  6. Silver with gilding and gold store separately, since the decorations can also be oxidized from such a neighborhood.
  7. Gilding cutlery After each application, carefully wash the soft sponges and wipe the suede or flannel to shine.

Care for gold-plated silver correctly, and it will delight you with your appearance for a long time!

How to clean the bought silver

Silver earrings or rings covered with rhodium, are not subject to corrosion, they retain the appearance longer, they do not darken. To clean them at home, do not use ammonia-containing, alkaline or acids.

The most efficient and safe method:

  1. Prepare a soap solution from any foaming composition (liquid soap, dishware, shampoo).
  2. If significant pollution is noticeable in the relief, clashes, hard-to-reach places, leave the silver composition for 10-15 minutes. Rinse under running water.
  3. Wet the soft napkin from microfiber or flannel.
  4. To silver glitter apply a few drops of glycerol onto cotton swab, treat the metal. Polish the velvet.

Soap and glycerin are well degreased surface, remove the raids and pollution, the radiance is returned. In addition, the method is safe for products with stones.

Download from YouTube, how to clean jewelry from the medical alloy. How to clean jewelry from darkening

It is difficult to imagine a woman who at least once wore jewelry. In the process of using decorations lose attractiveness and primordial appearance. There is a mass of ways to clean jewelry, each of which has certain tricks and tricks.

Classification of jewelry

Despite the fact that all decorations of non-precious metals belong to jewelry, they are classified into groups depending on the purpose. You can find on sale jewelry 3 types:

  • Classic. Analogue of decorations made of precious metals. Jewelry is made of simple metals, and then covered with spraying under gold or silver. Some elements are decorated with artificial stones - faceted glass, zirconium or an unnatural pearl.
  • Avant-garde. It is manufactured by the individual sketch manually. In the process of creating decorations, the wizard can use: polymer clay, leather or plastic. Add the sophistication of avant-garde jewelry semi-precious stones, rhinestones, beads.
  • Ethnic. It is decorations in the style of folk motives. The product consists of stones, animal fangs, feathers or wood.

How to determine what alloy is the jewelry made?

Before you start cleaning the decoration, determine what it is done. The main criterion will be the appearance of jewelry. If jewelry:

  • Reminds the silver decoration, it means that it is made of Melchior;
  • It has a pronounced yellow shade - it's brass;
  • It looks like silver, but with a bluish or greenish chip - it is a nezilber;
  • painted in brown with yellowish or reddish, it means that it is made of bronze;
  • Different with a special glitter inherent gold or silver is a Puteter.

Causes of darkening

Perhaps you have noticed that any decorations made of non-precious metals are darked over time. This process is explained by the property of metals to enter oxidative reactions with other substances. Since the decorations during socks are in contact with the skin, air and water, these reactions occur faster. In particular:

  • when the metal interacts with water, leather and air - the product loses color due to oxidation;
  • During contact with other products, the coating can scatter;
  • When contacting with household chemicals, the jewelry surface is rapidly losing shine and color.

To protect jewelry from possible oxidative processes and defects:

  • Remove all decorations in front of water treatments;
  • Protect products from contact with any detergent;
  • Store jewelry in a box or soft box;
  • For especially valuable decorations, buy a separate bag of fabric.

Do not despair if your favorite earrings or rings have darkened. They can still return purity and shine.

Soda

Food soda is not only a food product. The substance is actively applied in the people as an antiseptic and cleaning agent. The soda copes well with the cleaning of decorations covered with silver spraying, helps remove the flare and whiten the surface.

Progress:

  1. Mix the handful of soda with a tablespoon of water so that it turns out to be Cashier.
  2. Apply a lot to the darkened areas on the product.
  3. Leave the substance for exposure for 20 minutes.
  4. Remove the remnants of the cashecture with a brush or rinse with running water.
  5. Wipe the surface with a dry soft cloth.

If the procedure did not give due results, after a while, repeat the cleaning.

Toothpaste

If you need to clean the decoration with golden spraying, use the toothpaste.

Procedure:

  1. Prepare a paste and a soft unnecessary brush in advance.
  2. Apply the substance on the brush, and clean the product in the places of darkening.
  3. Remains of pasta rinse with running water.
  4. Wipe the surface with a dry clean cloth.

Note that there should be no additional impurities or powders in the toothpaste, otherwise the coating will erase

a piece of chalk

Chalk is well coped with cleaning jewelry. To return the jewelry of the former shade.

  1. Relieve chalk.
  2. 2 tbsp. Spoons of the resulting powder mix with 100 ml of water.

Rules for cleaning

The gilded thing is different from silver or gold, so the methods that are used for them are categorically not suitable. Golden spraying is very easy to spoil. The first phase of cleaning is considered to remove surface dirt - dust, stains, fat. To do this, it is enough to treat the surface with alcohol or turbidar.

Golden spraying is soft, so it is not recommended to use a strong mechanical impact, since there is a risk of surface damage. For leaving perfectly suits the suede fabric, it gives the glitter products and removes the stains. To clean the gilded clock sometimes enough to handle suede. If you need to clean the gilded table silver, pre-remove the fat from it.

Before processing, follow these steps:

  1. Take a clean dry cloth and wipe her gilt. Flange, suede and wool are perfect for this.
  2. After remove the surface dirt.

How to clean the gilded jewelry. How and what to clean the gilding to shine

Gold plated jewelry and cutlery in its appearance are not inferior to products from pure gold. However, during operation, it often occurs so that spoons and forks, earrings, bracelets, pendants and chains lose their shine and noticeably dull. But there are ways to clean the gilding and return her initial view at home.

What needs to be done before cleaning

Clean the cutlery and jewelry covered with gilding should be regularly. To begin with, the product is worth preparing:

  • Previously, it is necessary to clean the surface from dust and other contaminants using a soft cloth (cotton disk) dipped in turbidar or alcohol.
  • It is useful for silver with gilding and table vinegar. On the liter of water will need 2 tablespoons. If you leave products in a solution for 15-20 minutes, it will help to clean them from darkens and greens.

And you can do without soaking and just wipe pollution with a sponge moistened in a more concentrated solution (2 tablespoons on a glass of water). In both cases, after the procedure, it is necessary to wipe the products dry by a suede cloth.

It is important to remember that when cleaning the gilded items, it is categorically impossible to use such means as: rigid sponges and brushes, dry powders, aggressive acids. Otherwise, scratching or coverage can be formed on the gilding.

Removing darkening with gilding

There are many different methods for cleaning at home gilded jewelry and cutlery, not inferior to each other in efficiency, but different in composition. Therefore, you can not be posted in the purchase of components, but to use what is at hand.

Method First: Wine Alcohol

This option is suitable not only for the return of the initial shine to things and remove the darkening, but also for the prevention of their appearance. To do this, you only need to wipe the surface with a soft cloth moistened in wine alcohol. Then the dry suede to polish until the brilliance.

Method Second: Beer

Beer removes even the most complex darkening from the surface of spoons, forks, jewelry and, moreover, thanks to their gentle properties that do not bring harm with gilding is suitable for regular use. Dark beer is best suited, but any other variety can be used.

It will take just to lower the product to the cleaning to drink and leave for half an hour, then rinse with running water and dry well.

Method Three: Egg Squirrel

Egg protein will help to return the clothes in the original shine. To do this, it is enough to wipe the surface with a soft cloth moistened with this natural agent.

For too sweat gilding, you can add a bit of "whiteness" to the whipped protein, not more than 1 hour

l, but then you have to be careful and clean in rubber gloves

Four Method: Soap Solution

The easiest method of cleaning at home is a soap solution. In warm water, dilute 1 tsp. Underlet soap or dishwashing agents, and omit the product into the resulting solution. After 20-30 minutes, clean his surface with a soft toothbrush with a cropped pile.

Fifth method: with ammonia alcohol

You can also clean the gold-plated product, placing it for 15-20 minutes in the dishes with a soap solution and the ammonia alcohol (1 liter of warm water + 1 h. Of any grated soap or liquid + 5-6 ammonia droplets). Due to this method, the gilding is getting rid of a greenish shade. But do not distinguate the products in the solution, otherwise the gilding can carry.

Rules for the care of gilded products

In order to avoid darkening or abrasion of the layer of gilding, you need to carefully care for jewelry and other products.

  • Gold-plated jewelry should be removed in front of the shower, the beginning of homework, as well as before applying cosmetics (cream, perfume, scrubs).
  • It is not recommended to take similar products with you on vacation at sea. Salt water adversely affects gilding, and therefore it seems impossible with beloved jewelry, then it must be removed before bathing.
  • Store gilded decorations, spoons and other cutlery, best in a closed box or a special box, as far as possible from sunlight and heating devices. It will protect both the gilding itself and some types of precious stones from the destructive effects of ultraviolet, will help preserve as longer as possible, their original appearance.

Cleaning products need to be carried out regularly, without waiting, while darkening or falling on the gilding is formed.

How and what to clean the darkened jewelry

Scramble the product may be due to the oxidation process to which the metal is subjected. It is necessary to clean jewelry - this is an event that will help to contain a proper accessory.

For example, without having the ability to attribute the product to the master, you can clean the jewelry at home.

Jewelry is an excellent alternative to expensive decorations, and it looks as elegant. True, it quickly loses its beauty - dull, covered with rusty spots, but experienced hosts have long been learned to give their favorite earring and pendants a new life.

Correct care

Quality bijouterie sometimes costs its mistress is not much cheaper than jewelry, so it is necessary to care for it.

  1. Remove your favorite jewelry when you take a shower or apply cream.
  2. Try not to spray perfumes on jewelry, guard it from contact with lacquer removal fluid.
  3. Do not leave them in the bathroom, where high humidity, on the windowsill or table, where the sun's rays penetrate.
  4. Do not forget to clean the jewelry from pollution before putting it on storage. Carefully consider the decoration, check whether it is good: even a small amount of moisture may be the cause of rust.

A little effort and even less financial costs - and your jewelry pleasing to the eye!

How to properly clean jewelry under gold or silver?

Products decorated under silver or gold are popular with women of all ages. Care for these subjects does not imply any difficulties. If you do not rub the surface and use one of the following approaches, then the appearance of jewelry will be saved for a long time:

  • If traditional soaking in the soap solution did not give the desired result, then several drops of ammonic alcohol need to add to water and soap. You don't need to rub intensively, the darkening must pass without problems.
  • In addition, imitation for gold is allowed to be treated with a soft sponge dipped in white wine vinegar. It is not necessary to soak the product, we simply rub it up to the desired shine, rinse in clean water and leave dry out naturally.
  • The more often the preventive treatment of jewelry decorated for precious metals will be carried out, the less they will have to be subjected to intense cleaning. You need to take care of the habit of care for jewelry, even if it is temporarily not used.

Quality care for sparkling accessories is the key to their long-term service. If the manipulation did not give the desired result, then from the subject it is necessary to get rid of or isolate it from other jewelry, otherwise the oxidative processes turn into adjacent products.

Toothpaste

Toothpaste perfectly restores metal jewelry (with a spraying for gold):

Just spread the paste on a toothbrush that your teeth you do not clean for a long time, use to clean toilet bowls and cleaning. Well! The softer the brush is a pile, the better. After the brush on the beads and pebbles from the metal. SUME PASTUER WATER WATER. And Wreaty Beads and Rangs with a Dry Rag .. We started to dark decorations, imitating gold products, in no case do not clean abrasives

They will erase the whole pseudo-gilding (spraying) - cute robbles will have to just throw

Began to darken the decorations, imitating products from gold, in no case are no abrasives. They will erase the entire pseudo-gilding (spraying) - cute ribbles will have to just throw away.

Maybe they will be interested: how much time is stored fresh champignons in the refrigerator

Materials

Relying on the features of materials used in the manufacture of jewelry, allocate several funds with which you can clean the products from the darkening.

  • Metal accessories without spraying and additional elements can be cleaned using an ordinary food soda. By adding a pinch of soda to a small vessel, there are several drops of water and stirred before the formation of Cashitz. The composition is applied to the darkened areas and after some time it is neatly removed. During the stay on the decoration of the particle, the mixture is exfoliated with pollution from the product. Another way to clean jewelry from metal is the use of dental powder. It is triturated on the surface, and then wash off with water. After that, the decoration is wiped with a soft cloth. An alternative cleaning solution is similar to the use of chalk.
  • Plastic products are easier to clean the easiest - they are enough to just put into the container and pour water with a detergent. For some time, jewelry is left in solution, then the container shakes and washed with accessories under warm water.
  • To clean the glass, you can use the powder or soap, making a solution from them. In order for the surface to acquire a gloss, it is treated with the help of ammonia alcohol.

  • Soap solution is also used to remove darkening from rhinestones. But it is not recommended to apply to the products covered with rhodium - it is preferable to use a weakly concentrated ammonia.
  • Special compositions of public ingredients are prepared to restore the gloss of copper ornaments: a small food salt is mixed with a nine percent acetic essence so that the mixture has a consistency of paste. Rotaining with this means the decoration and solidify it with water, you can return the bracelet, earrings or pendant the primordial look. A similar result provides garlic mixture. Tongs are pressured and add some salt in them. The composition is left on the decoration for 5 minutes, and then wash off.
  • Gold spraying is a very popular coating for metal jewelry. Such products are particularly fragile and unstable to various mechanical and chemical influences. Sometimes, as a result of oxidation, Patina is formed on them - a foreign film covering the surface. Gilding on such decorations need to be constantly maintained in perfect condition.

The easiest way to care is to put the accessory in warm water with soap and a pair of tea spoons of the ammonia. The most preferred soap is nursery, because it does not contain fragrances. The decorations should be slightly lost with a soft sponge or cloth, they are not recommended to keep them in water for more than a minute, otherwise the wet medium can reverse the effect on the state of decorative products.

Each time after use, the decoration should be wiped with a special soft cloth from the microfiber. The flannel material is also suitable. By this, you have a longer time to save the surface from darkens and pollution.

The wine vinegar will become a good tool for cleaning jewelry under gold. The gilded earrings and other decorations moistened in this fluid, and then washed under the jet of cold water. After washing the vinegar, do not wipe the product, but let him dry yourself. You can use a cold jet of air from a hair dryer to accelerate the drying process.

It is advisable to periodically clean the darkened chain, rings or bracelet with gilding with a toothpaste with a soft composition.

For safe cleaning of gilded surfaces, such public resources as egg yolk or good quality beer are suitable. It is enough to leave the product in a glass with a beer for half an hour, then rinse and dry.

Do not attempt to return to the gold-plated accessories, the primordial view with the help of concentrated or caustic compositions. It is strictly forbidden to use acetic acid, soda and even teeth powder.

Separate attention deserves cleaning of some stones requiring special care:

  • Turquoise and artificial pearls are very fragile materials that do not tolerate any exposure to foreign substances, even water. The best tool for maintaining them in good condition is polished with a dry soft cloth.
  • Aquamarins and pearl stones are washed in clean cool water, then rubbed with a rag or dried with a hair dryer.

How to clean silver with stones

Clean the silver rings with stones can be in a jewelry cabin or at home. It follows to the density of the stones. Aquamarine, Emerald and Sapphire can be cleaned with a washing powder, the household soap will help remove fat and dirt from Malachite, lunar stone, opal and turquoise. It is impossible to lower silver earrings with ruby ​​or grenades in hot water.

It is important to very carefully and carefully clean the decorations with inserts: do not damage the insert itself and do not break fasteners. Products with amber, coral or pearls should be washed slightly warm water with soap

Aggressive cleaning products can destroy the structure of the stone.

Jewelry is a budget alternative to jewelry. It is made of inexpensive materials, stones, and the surface is often imitated by the precious metallol: silver or gold. Such products are much faster than natural jewelry, can turn, lose color. But you should not hurry to throw them away. Clean the jewelry and return to her an attractive view can be independently using simple and affordable funds.

Causes of darkening

Jewelry makes metal alloy, which are subject to oxidation when interacting with other substances. In contact with the skin, water (especially chlorinated, marine), the effects of air decorations gradually darkens, losing glitter, brightness.

Bijouterie

Jewelry can darken from household chemicals, perfumery, frequent contact with other objects. It is important to carry out regular cleaning of products, including stones, which also fade, scratch. Before cleaning and contact with water decorations is better to shoot.

Rules for cleaning

Care for jewelry depends on the material. For example, decorations with spraying can be cleaned with gentle means without abrasive particles. Copper does not like water, it is better to use vinegar to cleanse. Artificial stones just wipe with a dry cloth. Plastic parts should be washed in clean water without adding chemistry. But, despite the fact that each material requires special care, there are a number of rules applicable to any type of jewelry:

  • For cleaning, only a soft cloth or a brush, gentle chemicals, is used;
  • After processing, the product is well dried by a towel;
  • Jewelry can not be mashed in fluids for a long time;
  • With low quality, the decoration does not need to use alcohol-containing agents. It is safer to clean their toothpaste, soda or a solution made of water, as well as a small amount of ammonic alcohol;
  • Polish, stacking to shine decorations only with extreme need. You do not need to do this often, as the blows appear.

Attention! Many artificial stones fad and even change color when contacting water, such as turquoise. Therefore, it is better to clean them with a dry method.

Cleaning products

All mixtures and solutions for the processing of jewelry can be made at home from the primary components. There are a lot of cheap, efficient options from the darkening.

Cleaning jewelry

Special pasta

If there is no confidence that independently cooked cleaning tools will not spoil jewelry, it is better to buy a special set consisting of tonic or paste (GIO) in the jewelry store (GOI), a segment of the product to polish the product.

Soap mortar

The soap solution is prepared from liquid soap, shower gel, powder. Soapy chemistry must be diluted in water, add glycerin, put in a decoration tool for 15 minutes, periodically stirring them. Then jewelry should be rinsed, it is good to dry a towel or any other cloth.

Attention! To remove darkening, you can not use bleaching agents. They spoil accessories and remove the natural shine.

Dental powder and chalk

Clean the jewelry from the darkening can be mixed with chalk and dental powder. You will need 1 tbsp. l. Grinding chalk and 1 tbsp. l. Powder. They need to be combined with half a glass of water and mix to pasta consistency. On the jewelry to apply a cooked mixture with soft bristles, clean, wash with water and dried with a wool cloth.

Dentifrice

Toothpaste

Toothpaste is a universal and gentle tool for cleaning jewelry. It can even be cleaned with gold-plated products. On the toothbrush you need to apply a small amount of paste, clean jewelry in the darkening sites. Then rinse the product, wipe dry.

Soda

Food soda blends well, removes the darkening. It is often used to care for the subjects with silver spraying. Soda does not always give a positive effect from the first time. Therefore, if darkens remained, they should be cleaned again through a short time.

Baking soda

To clean the darkened jewelry, it is necessary:

  1. Little handy of soda mix from 1 tbsp. l. water. There should be a casual consistency.
  2. Blend on darkening, leave for 30 minutes.
  3. Wash the decoration, wipe the dry cloth.

Hazing

Carbonated drinks can be useful in the farm. For example, Coca-Cola has shown high efficiency in cleaning surfaces from various materials. To get rid of dark spots on jewelry, it also suits. To clean the decoration of the soda, it is necessary:

  1. Pour a sill drink in a saucepan, put in it products.
  2. Put on moderate fire, boil the contents of 10-15 minutes.
  3. Give the decorations to cool, rinse them, dry up a soft cloth.

Ammonia

The ammonia will help when the jewelry is undesirable to handle water and powder substances. It restores the color and glitter well, without damaging the surface. The ammonia alcohol is enough to moisten a piece of fabric, wipe the decorations well, and then a dry cloth to clean them to shine.

Ammonia

Garlic

Garlic perfectly copes with darkens of yellow metals, including alloy, which includes copper. You will need 2 cloves, they can be grain or grind them through the garber. Garlic should be filmed by a pinch of salt. Apply to the accessory to the accessory and hold 10 minutes, then clean the darkening. Next, jewelry washed in a soap solution, dry dry towel.

Vinegar

9% vinegar is cleaned crystal, copper objects. It must be mixed with a shallow salt, obtained by means of mixing the fabric and clean the problem areas. Vinegar washed off with water, wipe dry products.

Vinegar

Milk serum

Remove the darkening with jewelry can be serum. It will take 250 ml of the dairy product, add 2 hours to it. Salt. Components mix, moisten a cloth in solution, clean the decorations. As always, after the procedure, the tool is washed off, and the products are rubbed.

How to clean the products with a spraying?

Clean jewelry made under gold or silver, harder than accessories without spraying. Gold-plated and silver plated surfaces are quickly oxidized, they are darked and scratched, so it is recommended to use only gentle agents. The best options for cleaning jewelry with spraying at home are the ammonia alcohol, wine vinegar or soap solution:

  • To clean the items, it is necessary to prepare a simple solution: 2 h. Alcohol on 1 liter of water. Ornaments need to be placed in the prepared liquid and keep them in it for a few minutes, then wipe dry with a towel;
  • Cleaning with soap solution is carried out in the same way as ammonia, only instead of ammonia in the water, soaps are divorced. Its products should also be held a little in the solution, carefully dry;
  • If at home there is a wine vinegar, you can clean the accessories. For this, the towel is wetted in acid, and darkens are wiped. Then rinse decorations and dried without wiping.

Tip! To clean jewelry with a spraying, it is better to take a piece of natural suede, which rolls the surface after processing with one of the solutions. Pastes from food soda, salts, powders are not suitable, they can easily scratch the coating.

Objects with spraying can also be cleaned with egg squirrel, beer and turbidar.

Cleaning ornaments from other materials

Jewelry makes from a variety of materials, and this is not always metal. There are decorations of wood, plastics, leather, stones, glass, etc. Often, several materials are combined in one accessory. All of them require different care and various cleaning products.

Plastic

More often in jewelry, plastic from synthetic polymers is used, respectively, the loss of color or gloss occurs faster than in natural materials.

Plastic jewelry

To restore the initial type of plastic parts, a soap solution is suitable:

  1. In a slightly heated water, add soap, shower gel or powder.
  2. Soapsy tool to dissolve well, put in it sweat earrings, chains, bracelets, etc.
  3. The container with the solution is closed, leave it in it for 10-15 minutes, periodically slightly shacking the container.
  4. Purified accessories rinse and dry.

Wood

Wooden products will not be able to clean water based on water. Any impact of moisture can provoke their swelling and damage. Therefore, wooden decorations should be cleaned only with a dry method using flannel tissue.

Jewelry from wood

Even if the main material of the metal accessory, but there are inserts from wood, they are not recommended to expose moisture.

Stones

Any stones, both artificial and natural, cannot be processed by means containing acids whitening and abrasive substances. It is not recommended to use cleansing solutions if the stone cracked has chips or other integrity disorders. If there is some deformation, then it can be cleaned only with a dry way with the help of tissue.

Bijouterie from stones

If the stones are integers, a special solution is used:

  1. It will take 1 tsp. Soda, a few drops of ammonia, 250 ml of water.
  2. All ingredients are mixed, in the resulting means to put decorations for half an hour.
  3. After processing the product, rinse, wipe the soft towel.

Stone stone Robn, respectively, care for them is also different. For example, the fianit can be cleaned with soap solution, but then immediately need to rinse with running water, gently dry the napkin. No fluids are suitable for turquoise, it is possible to clean the surface of the stone only with a dry cloth. Artificial pearls can be processed in soap solution, but it should be borne in mind that the longer it is located in it, the brighter becomes pearls. Aquamarine, opal should be rinsed in clean, without impurities, wipe the towel.

It is not recommended to dry jewelry with stones with a hairdryer. It is possible that when drying hot air, they will simply disappear, if attached by glue.

Leather

Leather products just like wooden, afraid of water. Moisture negatively affects the material, leads to the ambulance, significantly worsens the appearance.

Jewelry from leather

Maximum than you can clean the product is a slightly moistened with a cloth, but preferably dry cleaning.

Glass and rhinestones

Jewelry is often complemented by glass elements, beads and brilliant rhinestones.

Glass jewelry

So that the sweat parts are again shone, they should be treated with soap solution:

  1. Any liquid soapy means is connected to water, a spoon is added to the spoon.
  2. The mixture is placed on a quarter of an hour. The more they are contaminated, the longer you need to keep them in solution.
  3. After soaking, the jewelry is washed, carefully wipes the napkin.
  4. When wiping products with rhinestones, you need to be particularly careful that they do not dug.

Copper

Copper accessories do not tolerate moisture, darkens appear from it, products quickly deteriorate. Therefore, cleaning tools should not be water based.

Copper decorations

Very good with the restoration of the pristine type of copper products, garlic copes:

  1. It must be crushed into Cashitz, add a table salt.
  2. Apply the prepared mass on the surface of the decoration, leaving for 5-10 minutes to influence.
  3. Then very quickly jewelry is washed with cool water, wipes a thoroughly dry cloth.

Also copper can be cleaned with a mixture of vinegar and salt. The tool is applied to a soft brush, a problem surface is cleared.

Jewelry Steel

Among the jewelry are often found products from jewelry steel. This alloy is not afraid of the sun, water, but at the same time long-finding in a humid environment contributes to the accumulation of the accessory.

Jewelry Steel

Ultraviolet rays, acids and abrasives are adversely affected by jewelry steel. To clean such decorations, use solutions, sponges on its effects.

Rules for storing jewelry

Jewelry, despite all its advantages, is much faster than products from natural materials. It is quite a capricious in the plan of care, storage. Get rid of defects much more difficult than preventing them. Therefore, the decorations remain beautiful for a long time, they need to be properly stored:

  • Jewelry should be stored in exceptionally dry, preferably dark place;
  • It is impossible to leave jewelry on the windowsill, under the right rays of the sun, in rooms with high humidity, wet cacles;
  • Ideally, all accessories need to be stored individually from each other, and not in one box;
  • Avoid getting cream, perfume, hair lacquer for products;
  • Before washing dishes, cleaning, bathing jewelry should be removed;
  • After each socks, even a small contamination appeared on the product, it should be cleaned immediately, at least a dry tissue napkin.

Clean the jewelry from the darkening, pollution, it is possible to restore its glitter at home, without resorting to the help of jewelry workshops or expensive professional funds. It is important to comply with the recommendations for the processing of jewelry, since each material has its own reactions when interacting with one or another substance.

How to clean jewelry from darkening using a screwdriver

An alternative to jewelry from precious metals is the jewelery. It looks stylish and beautiful, but over time it can darken, blame, lose the shine and presentability. Many fashionistas are interested in creating bijoutering from darkening using breeds and secure methods.

We have collected useful tips that will help whiten the blackness and return the edge of the original shine.

Jewelry looks beautiful and acts as a worthy alternative to products made of precious materials Jewelry looks beautiful and acts as a worthy alternative to products from precious materials. So that it keeps his shine, radiance and purity for a long time, spend cleaning and correctly organize storage

How to determine the material decoration

Before breeding jewelry, determine the material from which it is made.

As a rule, the following alloys are applied:

  1. Nezilber (nickel, copper and zinc) - the product has white color with a bluish or greenish tint. A distinctive feature is a corrosion resistant.
  2. Brass (copper and zinc) - the decoration has a yellow shade.
  3. Melchior (iron, copper, nickel, manganese) externally resembles silver.
  4. Puteter (based on tin) has a silver or golden coating.
Choosing a cleaning method, be sure to consider what a ring, bracelet or earrings For the manufacture of decorative products, various materials are used - glass, copper, metal, plastic, a variety of alloys. Choosing a cleaning method, be sure to consider what a ring, bracelet or earrings

Almost any jewelry includes metal, which is oxidized under the influence of water, air and contact with the body. Inlaid stones and rhinestones become muddy and losing their shine. To return the product the original form, you must clean it correctly using the appropriate means.

How to clean jewelry under gold

The question is relevant to many, how to clean the jewelry from darkening at home. Especially acute the problem concerns products with spraying, imitating gold. They cannot be cleaned with abrasive washcloths or aggressive means, as they remove the top layer.

Clear jewelry for gold at home in the following way:

  1. In the dishes pour warm water and add some liquid soap.
  2. Moisten a soft cloth in the solution and treat it decoration. Use cotton sticks to clean hard-to-reach places.
  3. Rinse the products with clean water and wipe dry.
Products with golden spraying require a special approach during cleaning Products with golden spraying require a special approach during cleaning. For care, it is impossible to use aggressive agents or abrasive substances, because they can remove the top layer, which will irreversibly ruined the decoration

How to clean jewelry from glass and plastics

Launder decorations made of glass, plastic or Czech beads will help Soap mortar . For its preparation, you can use any soapy means - liquid soap, powder, dishwashing liquid.

Do not use detergents with bleaching components to clean the jewelry. They damage the material and lead to the loss of its presentable species.

The order of cleaning decorations:

  1. Ring, bracelet, earrings or chain Place in soap solution.
  2. Leave the decoration for a few minutes, but periodically mix them with your hands.
  3. Rinse the products in clean water and wipe dry.
To return the gloss bess beads from glass, add a bit of ammonia alcohol during rinsing To return the gloss bess beads from glass, add a bit of ammonia alcohol during rinsing

Cleaning Rules Copper Products

Copper decoration look exquisitely and attractive, but under the influence of moisture they quickly oxidize and lose shine and beauty. In order for it for a long time retained their own kind, experts recommend care in 2 stages: cleaning and creating a protective layer.

To clean the jewelry, use one of the presented ways:

  1. In 1 l of water dissolve 30 g sorvalic acid, 3 tbsp. l. Skipidar and 4 tbsp. l. Alcohol . Sutitate the decoration with the solution obtained, then wipe the soft cloth.
  2. Cook pasta by connecting 9% vinegar and fine salt . Treat the product, and then rinse it and polish the soft cloth. An alternative can perform Blend of soda and lemon juice .
  3. Sattail on fine grater peeled garlic and add some salt to him . Apply the garlic mass and evenly distribute all the decorations. After 5 minutes, rinse it well and polish.
  4. Return the shine and remove darkens will help the mixture Dairy serum and salt in the ratio of 10: 1 . Moisten a rag in the mixture and treat it all the decoration. Rinse under running water and soda with a dry cloth.
Clear bracelets, rings and copper earrings will help affordable and secure homemade. Copper products look original and unusual, but their appearance often spoils green raid and dark spots. Clear bracelets, rings and copper earrings will help affordable and secure homemade.

The procedure for creating a protective layer:

  1. Clean the copper product in one way.
  2. Sattail the sponge that periodically wipe in water and turpentine.
  3. Pulse the decoration in a mixture of turpidar and digital varnish.

Features of cleaning products from other materials

Soda

Clear metal decorations without gilding will help soda. Divide the powder with a small amount of water so that there is a pasty mass. Apply a mixture on the decoration, and after a couple of hours, rinse with warm water.

Mel / Tooth Powder

For polishing metal jewelry, use chalk, dental powder or pasta without bleach. With the help of a soft napkin, soda decoration, and then rinse with running water and wipe dry.

After cleaning, be sure to wipe the products with a soft towel or napkin. The remaining water will lead to the emergence of new darkens or rust.

Soap + ammonia alcohol

The chains or rings made of metal with gilding can be cleaned with the help of a special solution. For its preparation in 1 liter of water, dissolve a small amount of liquid soap and add 2 h. Summer alcohol. Rinse in the resulting decoration solution, and then dry.

Others

Features of cleaning products from other materials:

  1. Decorations with turquoise or artificial pearls can not be cleaned with aggressive means and water.
  2. Products from aquamarine or opal wash under running water without using detergents. After cleaning, be sure to wipe them dry.
  3. Do not use vinegar pearl cleaning. Return the cleanliness and overflow the chalk paste will help.
To preserve artificial pearls and extend the life of the decoration, cover the stone with colorless varnish. It will save it from the negative impact of the environment and high humidity.

Rules for storing jewelry

Save the shine and purity of jewelry, save it from green plaque, oxidation and darkening will help the correct care. However, an important role is played by organizing storage and operating conditions.

To save the pristine type of jewelry, observe simple rules:

  • Remove the decorations before taking a bath, a shower, washing dishes or cleaning to protect them from contact with water and detergent;
  • In order to keep the beauty of products, before starting exploitation, cover them with colorless varnish;
  • Keep rings and earrings in a dark and dry place;
  • Avoid contact of decorations with creams or perfumes.
Store jewelry in a dark and dry place. Perfect option - Jewelry box with soft inner coating Store jewelry in a dark and dry place. Perfect option - Jewelry box with soft inner coating

You can clean the bijource from the darkening and the plaque at home using the remedies and the available substances. At the same time, be sure to take into account the type of material, the type of stones and general care recommendations in order not to damage the product.

Video

To familiarize yourself with the nuances of cleaning jewelry and care rules, see the presented videos:

About the author: Marina NabilskayaMarina Nabilskaya

Young mother, wife and freelancer part-time. As a lawyer for education, accustomed to collecting and provide the most complete and reliable information. It is constantly being improved in the professional field and strives for personal growth and development.

Found a mistake? Highlight text with the mouse and click:

Do you know that:

Special traps exist to combat mole. In the sticky layer, which they are covered, added females purses, attracting males. Adhesive to the trap, they are departed from the breeding process, which leads to a decrease in the population of moths.

The habit of "economically" to use the washing machine-machine can lead to the appearance of an unpleasant odor. Washing at temperatures below 60 and short rinsing allow fungi and bacteria with dirty clothes to stay on the inner surfaces and reproduced actively.

Fresh lemon suits not only for tea: Clean the contamination from the surface of the acrylic bath, losing the half of the cut citrus, or quickly wash the microwave, putting a water container and the lemon slices for 8-10 minutes at maximum power. The softened dirt will be just wiped with a sponge.

If the first signs of carrying in the form of untidy rods appeared on the favorite things, from them you can get rid of a special typewriter. He quickly and effectively swips the fabric fiber lumpy and returns to things worthy.

Remove scale and naughty with an iron soles are the easiest of the cooking salt. Pour a thick layer of salt on paper, heat the iron to the maximum and several times, slightly appropriate, swipe the iron on the salt litter.

Before removing various stains from clothes, you need to find out how safe the selected solvent is for the tissue itself. It is applied in a small amount on a small-wedge plot of stuff from the side of 5-10 minutes. If the material retains its structure and color, you can move to stains.

Not only plates and cups are wellhed in the dishwasher. It is possible to download plastic toys, glass lights of lamps and even dirty vegetables, such as potatoes, but only without the use of detergents.

PVC film ceilings can withstand from 70 to 120 liters of water for 1 m 2its area (depending on the size of the ceiling, the degree of its tension and quality of the film). So you can not fear leaks from your neighbors from above.

The threads of gold and silver, which in the old days embroidered clothes, are called repetitive. To obtain, the metal wire was pulled by ticks to the state of the necessary subtleties. Hence, the expression "pull (breed) canber" - "engage in long-shaped work" or "delay the execution of the case".

How to clean jewelry from darkening and oxidationJewelry is an inexpensive alternative to jewelry. They make it from low-cost materials and stones, and the surface often imitates under the precious metal - gold or silver. The jewelry is rapidly wearing and can refund, lose its color.

It does not need to be hurry to throw it away, you can try to clean. Cleaning jewelry from darkening and oxidation - the best ways will be described in this article.

Why does the bijouterie darkens?

Made bijouteria from metal alloy, which can oxidize when contact with other substances. When interacting with leather, water, air, the decorations are little darkened, lose their brightness and shine.

In addition, it can darken from the effects of household chemicals, frequent contact with other objects, perfume. It is important for them to regularly clean.

REFERENCE! Before you clean and contact with water, such decorations are better removed.

Details

Rules for cleaning

The choice of care depends on the material from which the jewelry is made. For example, decorations with a spraying is better to be brushed with soft means, without abrasive particles in the composition. To purify copper it is better to use vinegar. Plastic products are better to wash in clean water, do not add chemistry. But for all jewelry, there are some rules that are suitable for any kind:

- only a soft brush or cloth, as well as soft chemicals, is suitable for cleansing;

- after cleansing jewelry, you need to carefully dry the towel;

- Decorations can not be mashed for a long time;

- Alcohol-containing means at low quality products are better not to use. It is better to use toothpaste, soda or solution from water and ammonia;

- polish or stuck to brilliance jewelry better only with extreme need. This is due to the fact that they appear to be lost.

How to clean the darkened jewelry folk remedies

- after cleansing jewelry, you need to carefully dry the towel;All solutions and mixtures for cleansing decorations can be made of houses from the means that everyone has.

Soap solution - made of liquid soap of gel powder for the shower. For this purpose, one of these funds is bred in water and the glycerin is added. In the cooked decoration solution, it is hung for 15 minutes, periodically turning over. After that, jewelry is washed with clean water and wipe carefully.

Chalk and tooth powder

These ingredients must be mixed in equal proportions and connect from the floor with a glass until the paste is obtained. The prepared mixture is applied using a brush on jewelry and purify. After that, washed with water and dried with a cloth.

How to clean jewelry at home Toothpaste

It is a universal and gentle tool for any jewelry. Toothpaste is applied to the brush and clean it by jewelry. After the decoration was washed and wipe dry.

Baking soda

An excellent means of cleaning jewelry, whitens and eliminates the darkening. Soda is used to care for decorations with silver spraying. However, it does not always cope the first time, so in case of failure it is better to repeat. For cleansing you need to mix a small amount of soda with 1 tablespoon of water to obtain a cascidious consistency. Then apply a mixture on darkening and leave for half an hour. Decoration wash and wipe dry.

Carbonated drinks

Often helping the farm.

REFERENCE! Coca - Cola can clearly clean the jewelry from dark spots.

To do this, it must be pouring into a saucepan and put the product there. Put a saucepan on a small fire and boil the contents within 10 to 15 minutes. Now the decorations must cool, after which they need to be rinsed and dry.

Ammonia

Saves in cases where the decorations cannot be treated with water and substances with powdered composition. Perfectly restores shine and color, without damaging the surface. It is only necessary to moisten in the ammonia alcohol a piece of fabric and lose their decorations well. Then, with a dry napkin, clean the decorations to the brilliance.

Garlic

It helps to remove darkening with yellow metals. It is necessary to grind 2 teeth and fill the salt by a pinch. The resulting cleaner is applied to the decorations and are waiting for 10 minutes, after which the darkening is cleaned. Then the decorations are washed in the soap solution and dried.

Vinegar

It will take 9%, which helps clean the copper objects. Vinegar must be mixed with shallow salt and moisten the fabric in this agent. The products are cleaned with this cloth, then wash off vinegar with water, and the products wipe dry.

Milk serum

It will help to save decorations from darkening. It is necessary to dissolve 2 h. L. Salts in 250 ml of dairy serum. In the resulting solution, knead the fabric and clean it decoration. After that, the tool must be washed and wipe the product dry.

What to clean the gilded jewelry

Decorations made under silver or gold, it is more difficult to clean than the rest. This is due to the fact that such surfaces scratch and darken, quickly oxidize. For them, only soft tools should be used.

REFERENCE! The best means for this are wine vinegar, ammonia alcohol or soap solution.

  1. Summer - need to make a solution of 1 liter of water and 2 ppm alcohol. It should put decorations that need cleaning, and leave for a few minutes, and then dry.
  2. Soap solution - preparing mixing 2 tsp. Soap in 1 liter of water. The process is similar to the previous one with the ammonia.
  3. Wine vinegar - with its availability at home it is suitable for cleansing products. To do this, the fabric is wetted into vinegar and wipe the dark areas. Then the jewelry wash clean water and dried.

Cleaning jewelry from other materials

Decorations can be made of a variety of materials. There is even a jewelry of plastic, wood, stones, leather, glass, and so on.

REFERENCE! Often, several types of material are involved in one decoration, each of which needs different care and various cleansing agents.

Plastic

Usually, synthetic plastic is used for jewelry, which loses its color and shine faster than natural materials.

To return to the decorations from plastic, their original appearance, you will need a solution of soap:

  1. Lightly warm water and add soap, powder, shower gel, etc.
  2. Mix everything thoroughly and put into the decoration solution.
  3. Close the container with a solution for 10-15 minutes, sometimes scolding the contents.
  4. Pull the decorations and rinse them with clean water.

Wood

Wood products can not be brushed with liquid means and use water. Under the influence of water, such decorations can swell and spoil. Therefore, only dry methods for cleaning are suitable for wooden jewelry, with the use of flannel fabric.

How to clean jewelry with stones

And natural, and artificial stones can not be purified by acid-containing means whitening and containing abrasive components.

REFERENCE! It is better not to use any cleansing means if the stone has cracks, chips and other damage.

In such cases, they can be cleaned only with a dry way (tissue).

For whole stones, a special solution can be used:

  1. - only a soft brush or cloth, as well as soft chemicals, is suitable for cleansing;Mix 250 ml of water, 1 tsp. Soda and a few drops of the ammonia.
  2. Put the jewelry in the cooked solution and leave half an hour.
  3. Then rinse decorations and dry with a soft towel.

Leather

The decorations of the skin also do not like water, as it negatively affects them and leads to their spoilement, worsens the appearance.

The biggest thing that can be done for such products is to clean them with a cloth, slightly moistened in the water. But it is better to clean with a dry way.

Glass and rhinestones

Often on jewelry there are rhinestones, beads or glass elements.

To return to the sweat items of radiance, they are processed with soap solution. For this:

  1. Prepare a solution of water and any soapy means. Add a bit of ammonia alcohol (1 spoon).
  2. Decorations are left in this solution for 10-15 minutes. Time is increased with strong pollution.
  3. Then washed ornaments and wipe dry.

Copper

Copper products also do not tolerate water, they begin to darken and come into disrepair. Therefore, for copper you need to use water based on water. In this case, garlic can help.

  1. It should be chopped and mixed with a cook salt.
  2. Finished Cashitz are applied to jewelry and leave for a few minutes.
  3. Then very quickly, the decoration is washed under the jet of cool water and thoroughly wiping into a dry cloth.

Jewelry Steel

This alloy can often be found in jewelry. It is not afraid of the water and the sun, but with a long stay in the water they will darken.

Jewelry steel does not tolerate abrasives, acids, ultraviolet rays.

REFERENCE! For cleansing decorations, you can use only soft sponges and solutions.

How to store jewelry

Although jewelry related to jewelry, have many advantages, but they deteriorate much faster than natural jewelry. It is difficult for jewelry to care and need to be stored correctly. But with the moment of purification, you can never encounter if you follow the storage rules:

  1. Storage location - in a dry, dark place.
  2. Store jewelry in rooms with high humidity, as well as under the rays of the Sun, it is impossible.
  3. It will be great if all the jewelry will be stored in isolation from each other, and not falling into one container.
  4. It is not necessary to get a hair lacquer, perfume, creams.
  5. Cleaning, wash the dishes needed, after removing the decorations.

Clean jewelry from pollution, darkening, give it the brilliance and at home. It is only necessary to adhere to all recommendations for clearing jewelry, because each of the materials has its own reactions on the interaction of a means.

Recently, a girlfriend invited me for a birthday. Under the new dress perfectly suitable favorite set of jewelry. Opened the box and dumbfounded: clips and grinding strongly darkened and lost shine!

In the upset feelings began to search on the Internet tips, how to save my decorations from darkening. It turned out that this is possible. Summarized the information, and share with you.

Properly purified bijouterie will look like new.

8 methods for cleaning metal jewelry

What can be cleaned metal products at home:

Method 1: a solution of chalk

Instead of chalk, you can take a dental powder.

Procedure:

  • Grind the chalk into powder;
  • On 100 ml of water, add 2 tablespoons of chalk;
  • Lower the product into the solution for several minutes;
  • pull out and sweeten with a soft brush;
  • Rinse with clean water;
  • Sat the wool napkin.

Can be cleaned and toothpaste. Apply it on a soft brush and spend the product

Method 2: Food Soda

Suitable for: Metals imitating silver.

Procedure:

  • In the food soda, add water to turn out to be Cashier;
  • Apply to the surface of the product;
  • Leave for 10-15 minutes;
  • Clean the toothbrush;
  • rinse with water;
  • Wang dry soft rag
Method 3: Summer Alcohol

Suitable for: decorations under silver.

Procedure:

  • Water in the Nashayar fabric napkin;
  • Wipe the surface of the decoration;
  • Polish dry rags
Method 4: Soap Solution

Suitable for: Alloys under silver.

Procedure:

  • Make a concentrated soap solution;
  • Hold the product in soapy water 10 min;
  • Rinse with clean water;
  • Wipe the dry cotton cloth.

If not all pollution dissolved, clean them with a brush, moistened in the same solution

Method 5: Food Salt and Vinegar

Suitable for: Copper jewelry.

Procedure:

  • Mix the salt of fine grinding and table vinegar to the state of the casis;
  • Apply Cashitz on a piece of fabric;
  • Sattail the surface of the product;
  • Wash water;
  • Wipe dry with a soft cloth
Method 6: garlic

Suitable for: copper decorations.

Procedure:

  • Stodit several garlic cloves on a shallow grater;
  • Mix with a pinch of shallow salt;
  • Apply a mixture for decoration;
  • Leave for 5 minutes;
  • Rinse with running water;
  • Wipe dry.

Garlic can be skipped through the garbaged

Method 7: soap and ammonia alcohol

Suitable for: Yellow metal with spraying (under gold).

Procedure:

  • dissolve in warm water soap;
  • Lower the product to the soap solution for 5-10 minutes;
  • Wash the soft sponge (piece of fabric);
  • rinse water;
  • In a glass of clean water, add a few drops of ammonia alcohol;
  • rinse in the solution with a product (for brilliance);
  • Let dry yourself.

Jewelry with spraying is categorically impossible to clean abrasive means: erase coating

Method 8: Wine Vinegar

Suitable for: Metal surface with spraying under gold.

Procedure:

  • Moisten a cotton cloth in wine vinegar;
  • Wipe the surface of the decoration;
  • rinse water;
  • Let dry yourself

Capacity of cleaning products with glass inserts (rhinestones) and plastics

The dishwashing detergent can cope with the task and when cleaning jewelry
The dishwashing detergent is well cope with the task and when cleaning jewelry. Photo: Gazeta.a42.ru.

Sequencing:

  • dissolve in warm (up to 40 degrees) water for washing dishes;
  • Fold into the solution of the product;
  • Leave for some time (depending on the contamination);
  • Shake the container with jewelry so that the dirt is better behind;
  • rinse with clean water;
  • Dry.
To give decorations shine, add a bit of a bit of ammonia alcohol to the solution.

In contrast to the real, artificial pearls are not afraid of water, it can be cleaned with a soap solution.

3 Ways to clean natural and artificial stones

Gel is still more expensive and recommended for cleaning expensive products.
For stones are used dry cleaning with a soft napkin. Photo: Ladyinfo.in.ua.

Before proceeding to cleaning products with stones, you need to figure out natural or artificial. Semi-precious stones are undesirable to clean chemicals, including food soda. They are wedged in clean water or simply wipe with a soft napkin with polishing movements. Soap solution is allowed to brush citrine and fianit.

  1. Pearl, Aquamarine and Opal wash in clean water.
  2. Stones Swarovski Clean the napkin dipped in the ammonia alcohol.
  3. For refined turquoise Applicable only dry cleaning soft rag.
The refined turquoise is very sensitive to an alkaline medium, sweat and fat, you need to handle it carefully.

There are professional products to care for jewelry. Here is one of them:

The solution for delicate cleaning of the birth of gold and silver jewelry, with pearls and jewelry
The solution for delicate cleaning of the birth of gold and silver jewelry, with pearls and jewelry

"Alladin" is suitable for cleaning of the parent products, silver products with a breakdown below 925, with a galvanic coating, ornaments with coral, amber, pearl, turquoise, enamel and adhesive lines.

Mode of application:

  1. Place the decoration into the solution for a few seconds (10 - 20);
  2. Rinse with clean water;
  3. Dry wipe the napkin.

2 councils from the forum

Jenkson:

Special napkins are sold in some stores, but if you run and not clean, then, unfortunately, nothing will help.

Toxiccandy:

I cleaned the tooth pasta))) as before the slant ...

On the forums asked how to clean the cheap metal chain. Found 2 original councils:

1. Use special napkins

Специальные салфетки стоят недешево – почти 600 рублей за 25 штук
Special napkins are not suiced - almost 600 rubles for 25 pieces

2. Use gel for decorations

Гель стоит еще дороже и рекомендован для чистки дорогих изделий.
Gel is still more expensive and recommended for cleaning expensive products.

5 care tips

So that the jewelry retains the appearance for a long time unchanged:

  1. Remove the jewelry when you take a shower.
  2. Do not allow Spirits, deodorants and lacquer removal fluids.
  3. Do not leave jewelry in wet places and in direct sunlight.
  4. Before storage, clean the jewelry and dry well.
  5. Keep in special organizers for jewelry or boxes, where products do not scratch anything

What you need to remember

  1. Jewelry from different materials is cleaned differently. In order not to spoil the product, find out what it is done or apply neutral methods.
  2. Homemade means. You can clean jewelry by domestic products: chalk, food soda, ammonic alcohol, soap, salt, garlic, table and wine vinegar.
  3. Professional funds. Special pastes are sold in stores and gels for care of jewelry.
  4. Do well the jewelry.

It is difficult to imagine a woman who at least once wore jewelry. In the process of using decorations lose attractiveness and primordial appearance. There is a mass of ways to clean jewelry, each of which has certain tricks and tricks.

Classification of jewelry

Despite the fact that all decorations of non-precious metals belong to jewelry, they are classified into groups depending on the purpose. You can find on sale jewelry 3 types:

  • Classic. Analogue of decorations made of precious metals. Jewelry is made of simple metals, and then covered with spraying under gold or silver. Some elements are decorated with artificial stones - faceted glass, zirconium or an unnatural pearl.
  • Avant-garde. It is manufactured by the individual sketch manually. In the process of creating decorations, the wizard can use: polymer clay, leather or plastic. Add the sophistication of avant-garde jewelry semi-precious stones, rhinestones, beads.
  • Ethnic. It is decorations in the style of folk motives. The product consists of stones, animal fangs, feathers or wood.

How to determine what alloy is the jewelry made?

Before you start cleaning the decoration, determine what it is done. The main criterion will be the appearance of jewelry. If jewelry:

  • Reminds the silver decoration, it means that it is made of Melchior;
  • It has a pronounced yellow shade - it's brass;
  • It looks like silver, but with a bluish or greenish chip - it is a nezilber;
  • painted in brown with yellowish or reddish, it means that it is made of bronze;
  • Different with a special glitter inherent gold or silver is a Puteter.

Causes of darkening

Perhaps you have noticed that any decorations made of non-precious metals are darked over time. This process is explained by the property of metals to enter oxidative reactions with other substances. Since the decorations during socks are in contact with the skin, air and water, these reactions occur faster. In particular:

  • when the metal interacts with water, leather and air - the product loses color due to oxidation;
  • During contact with other products, the coating can scatter;
  • When contacting with household chemicals, the jewelry surface is rapidly losing shine and color.

To protect jewelry from possible oxidative processes and defects:

  • Remove all decorations in front of water treatments;
  • Protect products from contact with any detergent;
  • Store jewelry in a box or soft box;
  • For especially valuable decorations, buy a separate bag of fabric.

Do not despair if your favorite earrings or rings have darkened. They can still return purity and shine.

How to Clean Jewelry at home

Soda

Food soda is not only a food product. The substance is actively applied in the people as an antiseptic and cleaning agent. The soda copes well with the cleaning of decorations covered with silver spraying, helps remove the flare and whiten the surface.

Progress:

  1. Mix the handful of soda with a tablespoon of water so that it turns out to be Cashier.
  2. Apply a lot to the darkened areas on the product.
  3. Leave the substance for exposure for 20 minutes.
  4. Remove the remnants of the cashecture with a brush or rinse with running water.
  5. Wipe the surface with a dry soft cloth.

If the procedure did not give due results, after a while, repeat the cleaning.

Toothpaste

If you need to clean the decoration with golden spraying, use the toothpaste.

Procedure:

  1. Prepare a paste and a soft unnecessary brush in advance.
  2. Apply the substance on the brush, and clean the product in the places of darkening.
  3. Remains of pasta rinse with running water.
  4. Wipe the surface with a dry clean cloth.

Please note that there should be no additional impurities or powders in the toothpaste, otherwise the coating will erase.

a piece of chalk

Chalk is well coped with cleaning jewelry. To return the jewelry of the former shade.

  1. Relieve chalk.
  2. 2 tbsp. Spoons of the resulting powder mix with 100 ml of water.
  3. Lower the product in a container with a solution for 3 minutes.
  4. Soft brushes, spend the most contaminated areas.
  5. Rate the substance from the surface with running water, and wipe the product with a soft napkin.

Vinegar

Vinegar copes well with the cleaning of products from copper or crystal. For the procedure, a table vinegar is required 9% and a salt handy.

Progress:

  1. Dissolve salt in vinegar.
  2. Moisten a rag in solution.
  3. Thoroughly wipe the surface of the product, paying special attention to the corners and zabbins.
  4. Remove the mixture with water, and wipe the product with a dry napkin.

Please note that jewelry from surgical has become vinegar is prohibited, since the substance will provoke even greater darkening of the metal.

Ammonia

Suitable for cleaning jewelry made under silver and gold.

Procedure procedure:

  1. A small amount of ammonia pour into a wide container.
  2. Moisten a rag in the substance.
  3. Thoroughly wipe the surface of the decoration.
  4. At the last stage, soda the surface of the product with a dry clean cloth.

Soap mortar

Such a way you can clear the jewelry with golden or silver spraying, as well as rhinestones.

Action Scheme:

  1. Prepare a concentrated soap solution.
  2. Add glycerin to a mixture as a thickener.
  3. In the container with a solution to lower the decorations and wait 15 minutes.
  4. For a better effect, leak the vessel with products.
  5. Wipe the surface of the decorations with a wet sponge.
  6. Wash the composition with water, and soda products with a dry napkin.

You can strengthen the effect of substance by adding a bit of a bit of ammonia alcohol into the solution.

Normal detergent

An ordinary non-aggressive detergent is suitable for the procedure.

To clean jewelry:

  1. In plastic containers with water, spread some detergent.
  2. Lower the decoration into the vessel and every 2 minutes thoroughly take the cleaning mixture.
  3. Repeat actions for 15 minutes.
  4. After rinse the products with flowing water and wipe their surface with a clean cloth.

Note, to clean jewelry, covered by rhodium, washing similarly unacceptable, because the detergent can spoil the form of rhinestones.

Garlic

Garlic is suitable for cleaning copper jewelry.

Procedure:

  1. Clean and soda on a shallow grater of 2-3 cloves of garlic.
  2. Add a pinch of salt into the garlic mixture.
  3. Apply a mass on the surface of the products for 10 minutes.
  4. Thoroughly rinse the decorations with soapy water and wipe the dry cloth.

Milk serum

Well purifies from metal darkening. Ordinary dairy serum.

Progress:

  1. Glass of serum mix with 30 g of salt.
  2. Moisten a rag in salt serum and thoroughly wipe the surface of the jewelry.
  3. Residues of the solution are riveted with running water.
  4. In the end, wipe the surface with a dry soft cloth.

Hazing

It's no secret that Coca-Cola or sprite is often used as a cleaning agent. A similar method of soda can be cleaned and jewelry. To remove dark spots from the surface of the decorations:

  1. Prepare a small saucepan.
  2. Fold in it products and boils with gas.
  3. Boil the substance with decorations on the stove for 15 minutes.
  4. Rinse the products in clean water and wipe the dry cloth.

Cleaning methods depending on the type

To choose the cleaning method you need to know whether the means for a particular decoration is suitable, since individual substances can enter the reaction with different metals for jewelry.

In the process of socks, almost all products made of metal begin to darken. To return the decorations for the old form, it is enough to regularly clean their cleaning substances.

These include:

  • a piece of chalk;
  • Toothpaste;
  • Cashier from soda;
  • ammonia;
  • milk serum.

In addition, you can buy a tonic to clean the jewelry in a specialized store and use it to remove darkens on the surface.

How to clean jewelry under gold

To clean the products imitating gold, choose gentle methods. Remove contamination and darkening with jewelry you can:

  • mortar from the economic soap;
  • ammonia alcohol;
  • Napkin dipped in wine vinegar.

How to clean jewelry under silver

Products with silver spraying do not tolerate aggressive methods. Remove the flare on bijoux, imitating silver, you can in several ways. Suitable substances include:

  • Cashier of soda and water;
  • ammonia;
  • Soap solution.

Try to carefully wipe and dry the decorations after cleaning, otherwise a rusty stain will remain on the surface.

Copper, brass

The decorations made of copper or brass actively interact with water, which is why the metal is quickly oxidized and dark. Return the products of the former look will help vinegar with salt or garlic.

After cleaning, pay special attention to the drying of the product, since copper is oxidized under the prolonged action of water.

Glass and rhinestones

Decorations consisting of glass elements or rhinestones are best cleaned by the usual detergent. If the contamination is persistent, add a little ammonia to the soap solution. It carefully and thoroughly cleanses, and also gives the glitter of the glass surface.

Natural, artificial stones

Artificial or natural stones do not tolerate the effects of aggressive substances. The cleaning method is selected based on the type of stones. For instance:

  • opal, aquamarine and mother of pearl with running water and wipe the soft napkin;
  • Pearls soak in a soap solution, with the longer the substance acts, the brighter becomes pearls;
  • Fianits wash with soap solution and wash off with water immediately, and then wash the surface dry;
  • Turquoise just wipe the soft pure cloth.

What to clean jewelry from Melchior

Melchior - copper alloy with white nickel, is a cheaper equivalent of silver. Clear jewelry from Melchior you can with help:

  • ethyl alcohol, maminating a rag and rubbing the product;
  • vinegar;
  • soda;
  • dairy serum;
  • Coca-Cola or sprite.

Well established a way to clean the decorations from the melchior with a foil. For the procedure, prepare a saucepan, a piece of foil, 60 g of soda and some water. The bottom of the saucepan with foil and pour with water. Add the soda and fold the decorations. Boil the products in the container for 15 minutes. Then cool down and soda the soft cloth to the brilliance. Such a method is also suitable for processing cutlery from Melchior.

How to remove rust

Sometimes corrosion spots appear on products. Remove such spots will help the table or wine vinegar. Moisten a clean rag and soda damaged areas. When the stains go out, wash the product with running water and wipe dry with a napkin.

How to care and keep jewelry

The process of cleaning jewelry from darkening and pollution is simple, however, requires the costs of forces and time. To avoid this, follow the cleanliness of products and make limit on storage.

Bijource from Brassy

Brass decorations are considered "alive", since the material can change the color due to the interaction of surrounding factors. Brass jewelry is very soft, so contact her extremely carefully. Conduct metal polishing regularly so that the product does not darke with time. To do this, you can use ketchup or lemon juice, as well as a jewelry cleaning tonic or a special brass processing agent. To decorate remained in the original form, please contact him correctly, namely:

  • After socks, put in a special case or casket;
  • Do not store products in the bathroom;
  • protect from sun rays;
  • Do not take a bath or shower in jewelry.

Following the simple rules, you will not worry that the brass bijouterie will deteriorate.

Jewelry from jewelry steel

Typically, brutal decorations are created from jewelry. Metal is well experiencing the effect of sun rays or water. However, that the products always looked like new, do not allow for a long time in a wet place or under ultraviolet rays. To do this store jewelry in a box or box.

The worst enemy of jewelry steel - caustic or abrasive substances. Even short effects can lead to metal darkening. Use only gentle agents and soft sponges for cleaning decorations from pollution.

Jewelry under silver

To make products that imitate silver jewelry for a long time remaining new, do not allow:

  • impact of moisture and ultraviolet;
  • contact with cosmetics;
  • High temperatures.

Keep each product separately in a box or box. Do not store jewelry under silver in polyethylene, because the metal may suffocate and, as a result, to darken. Periodically spend cleaning of products with soap solution.

Jewelry under gold

Decorations covered with golden spraying are quite capricious. To avoid their damage:

  • Store each product in an isolated fabric bag;
  • Remove decorations in front of water treatments;
  • put on the last stage, because makeup products can adversely affect metal;
  • Do not wear decorations for sleep time, as the gilding is actively reacting to the skin selection.

From time to time, spend cleaning products with non-aggressive substances.

Jewelry from medical alloy

To decorate from the medical alloy have not changed the color and shape, the maximum attention is paid to the methods of storage and intact care. Regularly clean the products of products with non-aggressive and non-abrasive substances. Keep decorations separately from others in a special box or a bag of fabric. In order for the jewelry to be spoiled, limit the effects of sun rays and water, as well as cosmetic products, perfume or hair varnish. Do not wear products in the sauna, swimming pool or gym.

You can give darkened jewelry at home at home. At the same time, for the procedure, simple remedies will be required, which have each mistress in the kitchen cabinet. Cleaning method Choose based on the type of metal, the presence of additional elements like stones or rhinestones, as well as the degree of contamination.

Did you like the article? She was useful?

To clean the jewelry from darkening at home, it is necessary to rely on the type of material from which it is made. For decorations made of cheap metal, it is enough to use a soda solution. It must have a gravel consistency. Toothpaste also copes with the restoration of darkened metal jewelry with a spraying for gold. You can use a chalk solution or a 9% vinegar mixed with a crushed cook salt.
Bijouterie (source photo - Yandex. Martinki)
Bijouterie (source photo - Yandex. Martinki)

Put 👍 and subscribe to the channel "Svekarov.Net " . This will allow us to publish more interesting articles.

Cleaning jewelry from darkening

Home processing of jewelry can only be done in the event that there are no chips on the product, all stones are intact. Safety methods are used to clean jewelry.

Mixtures of liquid soap, powder, soda, toothpaste are created. They clean the decorations from pollution. Sometimes ammonia is added.

Features of the impact on the models with stones

First of all, the stones are investigated for strength. If they have splashes, you should be careful, as you can easily do chole or scratch the mineral. Therefore, only soft old toothbrushes, rags are used for cleaning. Avoid abrasive substances and acids. Before cleaning, inspect the place of fastening the stone so that there are no cracks or other flaws. If everything is in order, proceed to the procedure. To do this, pour a glass of water, fall asleep into it a teaspoon of soda, then mixed with several drops of ammonia alcohol and put the product to the made solution for 15-20 minutes.

Then the jewelry is rinsed and wipe dry. Stones are treated only with soft tissues so as not to scratch them and not break.

Cleaning jewelry with stone
Cleaning jewelry with stone

How to clean jewelry under gold and silver?

It is necessary to determine which material the decoration is created. The most common includes the following:

  • metal with galvanic coating (gilded or silver spraying);
  • stainless alloy;
  • plastic;
  • glass;
  • copper;
  • Stones.

When working with gilded decorations, you need to have a slice of suede. Initially, the product is wiping with turpentine or alcohol, removing fat and dust. The cleaning itself is carried out using the following folk remedies:

  • Wine alcohol - they are treated with the product;
  • Egg protein - mixed with a teaspoon "White", wipe, wear rubber gloves;
  • Beer - the decoration is soaked in it for half an hour.
Jewelry under silver can be purified in a soap solution, that is, in a mixture of water and liquid soap. Keep it there is long, a few minutes.
Cleaning jewelry with gilding (source photo - Yandex. Martinki)
Cleaning jewelry with gilding (source photo - Yandex. Martinki)
Products with gilding or silver coating paste using food soda are not cleaned not to erase spraying. If the product does not have such an outer layer, but is done under silver, soda can be applied without fear.

Plastic and Glass Products

In the water divorces the detergent for dishes. Then the mixture is poured into the plastic container.

The product is laying in it and shook. After that, jewelry is rinsed with running water and wipe. It can also be brushed in water with a powder or in water with liquid soap. When rinsed, some add a couple of drops of ammonic alcohol.

Metal decorations without decor

You can use a simple dental powder diluted with water. The solution brought to the consistency of the paste is rubbed all the decoration. Often it is used when cleaning the chain. An ordinary toothpaste also perfectly cope with pollution. You can apply a means consisting of soda diluted with water.

Copper product perfectly clean the salt with garlic. Garlic is cut on slices, sprinkle with salt, rub decorated decoration and withstand a few minutes. Another way to household procedure is the food chopped soda is divorced by 9% vinegar and is brought to the state of the casher. The decoration is rubbed to the agent, then the mixture is washed off.

How to care for leather and wood ornaments?

Wood products do not tolerate water completely. They are brushing only flannel.

The leather products are also impossible to clean with water, they are wiped with a cloth made of soft tissue. If there are cracks, rubbing on the jewelry, they are no longer subject to restoration.

For the project, your gratitude is important in the form 👍Subscriptions on Canal Zen. , ours Website ,Group Vk. and B. Facebook. ,On Channel B. Telegram , on YouTube. , in Instagramm. .Thank you in advance! :)

Author - Alina Kononova, A source

Read more: How quickly and easily remove the stains of the primer from different surfaces

Добавить комментарий